Product introduction companies engaged in molecular sieve pressure swing adsorption （ Pressure Swing Adsorption, referred to as PSA ） research and development, on the basis of the original, my company to foreign advanced PSA technology, with the domestic national professional design institute of close cooperation, and to our hospital status and medical oxygen demand, do a comprehensive survey and analysis, in particular the development of the " DYO-Y " series of medical oxygen generator. Company medical oxygen by pressure swing adsorption （ PSA ） technology as the foundation, the extraction of oxygen from air new equipment. Compressed air via the air purification drier after purification, by switching the valve into the adsorption tower. In the absorption tower, nitrogen is molecular sieve adsorption, oxygen in the top of the absorption tower is accumulated into the oxygen tank. Then by the peculiar smell removal and sterilization filter dust filter to obtain qualified medical oxygen. Company medical molecular sieve oxygenerator in oxygen making process is a physical adsorption process, no chemical reaction. Raw materials for the air, no pollution to the environment . It is implementation of hospital scientific management ideal oxygen, to ensure that users use the health of oxygen. The working principle Yue medical oxygen generator is to use the " PSA " principle of air pressure swing adsorption separation technology products. The air purification drier purification of compressed air into the bottom of the adsorption towers, tower is filled up with nitrogen under certain pressure has a strong adsorption capability of zeolite molecular sieve, when the air passes through the zeolite molecular sieve adsorption bed, nitrogen is absorbed, and oxygen is in the top of the tower body, enriched, after in addition to smell, dust and bacteria filter, access to qualified medical oxygen. The whole adsorption process, no chemical reaction, no pollution to the environment. Medical oxygen generator system settings two adsorption tower, a tower adsorption oxygen producing, tower desorption regeneration, alternay, continuous production of oxygen. Main technical parameters oxygen flow rate: 1-50Nm³/h oxygen purity: 93 ±3% oxygen pressure: 0.3-0.5MPa （ adjustable ） gel:≤ -48 ℃（ atmospheric ） system simple flow chart of medical PSA oxygen, liquid oxygen, bottle oxygen three contrast
Oxygen oxygen bottles of oxygen pressure swing adsorption oxygen generator
Standard Y Y / T0289, 1998 GB8982-1998 GB8982-1998
Test report of the national medical device testing organization of product performance testing report of pressure vessel pressure vessel test report test report
Operation manual operation manual operation automation control
Oxygen purity according to the pharmaceutical industry standard was 93± 3% according to pharmacopoeia 99% according to pharmacopoeia 99%
Oxygen pressure of 0.3 ～ 0.5MPa evaporation pressure: liquid 0.8MPa ultra high pressure gaseous 15MPa
The installation area belongs to class I type B permanent installation of equipment, can be mounted in the interior of the basement floor, roof, outdoor installation, civil construction, from around the ignition point of not less than 25 meters, the distance of not less than 50 meters of the important public building ground indoor installation
Requirements of ambient temperature -183 ℃ambient temperature
The transport of raw materials for air, power consumption, no need of every 3 to 5 days for transport of liquid oxygen tank is sent to the hospital for filling empty cans every car transport of oxygen cylinders
Safety safety performance is good, the complete set of equipment is often low pressure operation more dangerous, liquid oxygen at ultra low temperature comparison of risk, room is at high pressure.
Life 10 years every 2 years tank overhaul once every 5 years, must be replaced every 2 to 3 years the replacement tank
Oxygen cost of 0.9 yuan to 3.8 yuan in 7 yuan /Nm3 /Nm3 /Nm3
Investment recovery 1～ 2 years purchased liquid oxygen, no recovery purchased liquid oxygen, no recovery
Medical oxygen generator model table
Specification for oxygen production installed power beds
DYO-3Y 35.1 = 200
DYO-5Y 57.8 = 250
DYO-8Y 811.5 = 450
DYO-10Y 1016.7 = 500
DYO-15Y 1519.9 = 700
DYO-20Y 2026 = 1000
DYO-25Y 2531.2 = 1150
DYO-30Y 3038.9 = 1300
DYO-38Y 3842.3 = 1800
DYO-45Y 4552.5 = 1900
DYO-50Y 5058.8 = 2000
Medical oxygen generator medical oxygen generator medical oxygen generator
The data in the table to 0.6MPa （g ） of the raw material of compressed air, the environmental temperature of 20 to 0 meters elevation, and 80% relative humidity for design reference. Installation site for indoor non-explosion-proof area, environment temperature 3-45 ℃, good ventilation. The device requires power: 220V/380V, 50Hz, oxygen pressure is higher than 0.5pa, can boost to the user required pressure. Surface installed power of compressor installed power, others required to power the beds are for reference only. The data are subject to change, please follow the following provides data for quasi.
產品介紹
公司從事分子篩變壓吸附技術（Pressure Swing Adsorption,簡稱PSA）的研發，在原有的基礎上，我公司把*進的PSA技術,與國內*的專業設計研究院緊密合作，以及對我國醫院的現況和科研氧的需求，做了全面的調查和分析，特別研發了“DYO-Y”系列*。
公司*以變壓吸附（PSA）技術為基礎，從空氣中提取氧氣的新型設備。壓縮空氣經空氣純化干燥機凈化后，通過切換閥進入吸附塔。在吸附塔內，氮?dú)獗环肿雍Y吸附，氧氣在吸附塔頂部被聚積后進入氧氣儲罐．再經除異味除塵過濾器和除菌過濾器過濾即獲得合格的科研氧氣。
公司科研分子篩制氧機在制氧過程為物理吸附過程，無化學反應。原料為空氣，對環境無污染．是實現醫院科學化管理的理想供氧方式，確保用戶用上健康的氧氣。
工作原理
鼎岳*是運用“PSA”變壓吸附原理分離空氣的技術產品。經空氣純化干燥機凈化處理的壓縮空氣進入吸附塔底部，塔內裝填有在一定壓力下對氮?dú)庥休^強吸附能力的沸石分子篩，當空氣通過沸石分子篩吸附床時，氮?dú)獗晃?，而氧氣則在塔體頂部得到富集，在經過除異味、除塵和除菌過濾器，獲得合格的科研氧氣。整個吸附過程，無化學反應，對環境無污染。
*系統設置兩個吸附塔，一塔吸附產氧，一塔脫附再生，循環交替，連續生產氧氣。
主要技術參數
氧氣流量：1-50Nm³/h
氧氣純度: 93±3％
氧氣壓力：0.3-0.5MPa（可調）
露 點：≤-48℃（常壓）
系統簡易流程圖科研變壓吸附式制氧、液氧、瓶氧三者對比
| 供氧方式 | 變壓吸附制氧機 | 液氧 | 瓶氧 |
| 標 準 | Y Y／T0289—1998 | GB8982-1998 | GB8982-1998 |
| 檢測報告 | 國家科研檢測機構 | 壓力容器檢測報告 | 壓力容器檢測報告 |
| 可操作性 | 自動化控制 | 人工操作 | 人工操作 |
| 氧氣純度 | 按醫藥行業標準≥93±3％ | 按藥典99％ | 按藥典99％ |
| 氧氣壓力 | 低壓0.3～0.5MPa | 蒸發中壓：液態0.8MPa | 超高壓氣態 15MPa |
| 安裝場地 | 屬于I類B型*行安裝設備，可安裝在室內、樓頂、地下室 | 地面室外安裝，距離周圍民用建筑、發火點不小于25米，距離重要公共建筑不小于50米 | 地面室內安裝 |
| 溫度要求 | 常溫 | -183℃ | 常溫 |
| 運 輸 | 原料為空氣，消耗電力,無需運輸 | 每3～5天液氧槽車送至醫院灌充空罐 | 每天專車運輸氧氣瓶 |
| 安 全 性 | 安全性能好，整套設備處于常低壓運行 | 比較危險，液氧處于超低溫 | 比較危險，機房處于高壓狀態。 |
| 使用壽命 | 10年以上 | 每2年罐體大檢一次， | 每2～3年更換 |
| 氧氣成本 | 0.9元/Nm3 | 3.8元/Nm3 | 7元/Nm3 |
| 投資回收 | 1～2年 | 外購液氧，無回收 | 外購液氧，無回收 |
*型號表
| 規格型號 | 氧氣產量 | 裝機功率 | 適用床位 |
| DYO-3Y | 3 | 5.1 | ≈200 |
| DYO-5Y | 5 | 7.8 | ≈250 |
| DYO-8Y | 8 | 11.5 | ≈450 |
| DYO-10Y | 10 | 16.7 | ≈500 |
| DYO-15Y | 15 | 19.9 | ≈700 |
| DYO-20Y | 20 | 26 | ≈1000 |
| DYO-25Y | 25 | 31.2 | ≈1150 |
| DYO-30Y | 30 | 38.9 | ≈1300 |
| DYO-38Y | 38 | 42.3 | ≈1800 |
| DYO-45Y | 45 | 52.5 | ≈1900 |
| DYO-50Y | 50 | 58.8 | ≈2000 |
* * *
■ 本表中所列數據以0.6MPa（表壓）的原料壓縮空氣,20℃環境溫度，0米標高和80%的相對濕度為設計基準。
■ 安裝現場為室內非防爆區，環境溫度3-45℃，通風良好。
■ 裝置要求電源:220V/380V，50Hz，氧氣壓力要求高于0.5pa時，可增壓至用戶所需壓力。
■ 表中裝機功率指壓縮機裝機功率，其他所需功
■ 床位數據僅供參考。數據如有變動，請按照后提供的數據為準。
